Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UY
  6. UY 207-107 2S.H

UY 207-107 2S.H

Y-Ball Bearings With Eccentric Locking Collar

36.513mm
d · Bore diameter
72mm
D · Outside diameter
25.5kN
Cdyn · Dynamic load rating
15.3kN
Co · Static load rating
0.425kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UY 207-107 2S.H

Cross references

ManufacturerDesignation / part number
FAFNIRRA107RRB
LONG MANUFACTURING N.C.9-90314
MASSEY FERGUSON833939M1
OWATONNA010-11697
OWATONNA010-32364

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
H
No lubrication hole
All prefixes and suffixes

Downloads

UY 207-107 2S.H

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter36.513mm
DOutside diameter72mm
BWidth inner ring25.4mm
CWidth outer ring19mm
sDistance from inner ring side face to raceway centre9.5mm
d1Outer diameter inner ring46.1mm
GsSet screw3/8-24 UNFinch
swHexagonal key size for set screw4.763mm
swHexagonal key size for set screw3/16inch
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension1mm
B1Width inner ring with locking collar38.9mm
d2Locking collar outside diameter51.2mm
B2Width locking collar17.5mm
kgMass0.425kg
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.66kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UY 207-107 2S.H
Technical drawingClick to enlarge