Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UY
  6. UY 203-010 2S

UY 203-010 2S

Y-Ball Bearings With Eccentric Locking Collar

15.875mm
d · Bore diameter
40mm
D · Outside diameter
9.56kN
Cdyn · Dynamic load rating
4.75kN
Co · Static load rating
0.125kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UY 203-010 2S

Cross references

ManufacturerDesignation / part number
SKFYET 203-010
INAGRA010-NPP-B-AS2/V
SNRES202-10G2
NTNAEL202-010W3

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UY 203-010 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter15.875mm
dBore diameter5/8inch
DOutside diameter40mm
BWidth inner ring19.1mm
CWidth outer ring12mm
sDistance from inner ring side face to raceway centre6.2mm
d1Outer diameter inner ring24.2mm
EDistance from raceway centre to the hole for lubrication3.6mm
GsSet screw1/4-28 UNFinch
swHexagonal key size for set screw3.175mm
r1,2Inner ring Chamfer dimension0.3mm
r3,4Outside ring Chamfer dimension0.6mm
B1Width inner ring with locking collar28.6mm
d2Locking collar outside diameter28.6mm
B2Width locking collar13.5mm
CdynDynamic load rating9.56kN
CoStatic load rating4.75kN
PuFatigue load limit0.2kN
kgMass0.125kg
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UY 203-010 2S
Technical drawingClick to enlarge