Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UY
  6. UY 206-103 2S

UY 206-103 2S

Y-Ball Bearings With Eccentric Locking Collar

30.163mm
d · Bore diameter
62mm
D · Outside diameter
19.5kN
Cdyn · Dynamic load rating
11.2kN
Co · Static load rating
0.316kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UY 206-103 2S

Cross references

ManufacturerDesignation / part number
JOHN DEEREJD9400
JOHN DEEREAE28291
JOHN DEEREC16979
JOHN DEEREN15764
SKFYET 206-103
INAGRA103NPPB-AS2/V
SNRES 206-19G2

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UY 206-103 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter30.163mm
DOutside diameter62mm
BWidth inner ring23.8mm
CWidth outer ring18mm
sDistance from inner ring side face to raceway centre9mm
d1Outer diameter inner ring39.7mm
EDistance from raceway centre to the hole for lubrication5.1mm
GsSet screw5/16-24 UNFinch
swHexagonal key size for set screw3.969mm
swHexagonal key size for set screw5/32inch
r1,2Inner ring Chamfer dimension0.6mm
r3,4Outside ring Chamfer dimension0.6mm
B1Width inner ring with locking collar35.7mm
d2Locking collar outside diameter44.2mm
B2Width locking collar16mm
kgMass0.316kg
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.48kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UY 206-103 2S
Technical drawingClick to enlarge