Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type US
  6. US 303 2S

US 303 2S

Y-Ball Bearings With Standard Inner Ring

17mm
d · Bore diameter
47mm
D · Outside diameter
13.5kN
Cdyn · Dynamic load rating
6.55kN
Co · Static load rating
0.14kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: US 303 2S

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
US 303 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter17mm
DOutside diameter47mm
BWidth inner ring14mm
d1Outer diameter inner ring26.5mm
EDistance from raceway centre to the hole for lubrication4.3mm
r1,2Inner ring Chamfer dimension0.7mm
D1Hole diameter37.6mm
CdynDynamic load rating13.5kN
CoStatic load rating6.55kN
PuFatigue load limit0.275kN
kgMass0.14kg
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – US 303 2S
Technical drawingClick to enlarge