Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type US
  6. US 204 2S

US 204 2S

Y-Ball Bearings With Standard Inner Ring

20mm
d · Bore diameter
47mm
D · Outside diameter
12.8kN
Cdyn · Dynamic load rating
6.6kN
Co · Static load rating
0.09kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: US 204 2S

Cross references

ManufacturerDesignation / part number
INAORAE20NPPB
SKF1726204B-2RS1

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
US 204 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter20mm
DOutside diameter47mm
BWidth inner ring14mm
d1Outer diameter inner ring28.2mm
EDistance from raceway centre to the hole for lubrication4.3mm
r1,2Inner ring Chamfer dimension1mm
D1Hole diameter38.6mm
CdynDynamic load rating12.8kN
CoStatic load rating6.6kN
PuFatigue load limit0.196kN
kgMass0.09kg
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – US 204 2S
Technical drawingClick to enlarge