Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type US
  6. US 205 2S

US 205 2S

Y-Ball Bearings With Standard Inner Ring

25mm
d · Bore diameter
52mm
D · Outside diameter
14kN
Cdyn · Dynamic load rating
7.8kN
Co · Static load rating
0.12kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: US 205 2S

Cross references

ManufacturerDesignation / part number
INAORAE25NPPB
SKF1726205B-2RS1

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
US 205 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter25mm
DOutside diameter52mm
BWidth inner ring15mm
d1Outer diameter inner ring33.6mm
EDistance from raceway centre to the hole for lubrication4.3mm
r1,2Inner ring Chamfer dimension1mm
D1Hole diameter44mm
CdynDynamic load rating14kN
CoStatic load rating7.8kN
PuFatigue load limit0.232kN
kgMass0.12kg
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – US 205 2S
Technical drawingClick to enlarge