Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type N
  6. UEN 210 2S

UEN 210 2S

Y-Bearing Flanged Units With Oval Grey Cast Iron Housing "N"

50mm
d · Bore diameter
157mm
J · Pitch circle diameter
35.1kN
Cdyn · Dynamic load rating
23.2kN
Co · Static load rating
1.98kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UEN 210 2S

Cross references

ManufacturerDesignation / part number
INAPCJTY50-N
SNRUSFL210

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UEN 210 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter50mm
LOverall width115mm
ADistance from the housing flange to the front of the inner ring of the bearing49.6mm
A1Total housing width40mm
A2Housing flange thickness18mm
HHousing height195mm
JPitch circle diameter157mm
NDiameter of attachment slot19mm
kgMass1.98kg
CdynDynamic load rating35.1kN
CoStatic load rating23.2kN
PuFatigue load limit0.98kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UEN 210 2S
Technical drawingClick to enlarge