Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type N
  6. LKN 210 2F + H2310

LKN 210 2F + H2310

Y-Bearing Flanged Units With Oval Grey Cast Iron Housing "N"

45mm
d · Bore diameter
157mm
J · Pitch circle diameter
35kN
Cdyn · Dynamic load rating
23.2kN
Co · Static load rating
2.1kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LKN 210 2F + H2310

Cross references

ManufacturerDesignation / part number
SKFFYTJ 50 KF + H 2310
SNRUKFL210H
NTNUKFL210D1;H2310X
FAGUKFL210 + H2310X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LKN 210 2F + H2310

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter45mm
LOverall width115mm
ADistance from the housing flange to the front of the inner ring of the bearing58.5mm
A1Total housing width40mm
A2Housing flange thickness18mm
HHousing height195mm
JPitch circle diameter157mm
NDiameter of attachment slot19mm
kgMass2.1kg
CdynDynamic load rating35kN
CoStatic load rating23.2kN
PuFatigue load limit0.695kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LKN 210 2F + H2310
Technical drawingClick to enlarge