Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type N
  6. LEN 210 2F

LEN 210 2F

Y-Bearing Flanged Units With Oval Grey Cast Iron Housing "N"

50mm
d · Bore diameter
157mm
J · Pitch circle diameter
35.1kN
Cdyn · Dynamic load rating
23.2kN
Co · Static load rating
2.13kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LEN 210 2F

Cross references

ManufacturerDesignation / part number
NTNUCFL210
NSKUCFL210
SKFFYTJ50TF
FAGUCFL210J7
HORSCH00240178
INARCJTY50
SNRUCFL210
RHPSFT50

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LEN 210 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter50mm
LOverall width115mm
ADistance from the housing flange to the front of the inner ring of the bearing54.6mm
A1Total housing width40mm
A2Housing flange thickness18mm
HHousing height195mm
JPitch circle diameter157mm
NDiameter of attachment slot19mm
kgMass2.13kg
CdynDynamic load rating35.1kN
CoStatic load rating23.2kN
PuFatigue load limit0.98kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LEN 210 2F
Technical drawingClick to enlarge