Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type G
  6. LKG 208 2F + H2308

LKG 208 2F + H2308

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

35mm
d · Bore diameter
120mm
J · Pitch circle diameter
32.5kN
Cdyn · Dynamic load rating
19.8kN
Co · Static load rating
2.1kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LKG 208 2F + H2308

Cross references

ManufacturerDesignation / part number
SNRUKFC208H
NTNUKFC208D1;H2308X
FAGUKFC208 + H2308X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LKG 208 2F + H2308

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter35mm
DaCentering diameter100mm
LOverall width145mm
ADistance from the housing flange to the front of the inner ring of the bearing38.5mm
A1Total housing width36mm
A2Housing flange thickness9mm
A3Centering diameter height10mm
JPitch circle diameter120mm
J1Distance between the holes84.8mm
NDiameter of attachment slot14mm
kgMass2.1kg
CdynDynamic load rating32.5kN
CoStatic load rating19.8kN
PuFatigue load limit0.56kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LKG 208 2F + H2308
Technical drawingClick to enlarge