Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type C
  6. UEC 205 2S

UEC 205 2S

Y-Bearing Flanged Units With Round Pressed Steel Housing "C"

25mm
d · Bore diameter
76mm
J · Pitch circle diameter
14kN
Cdyn · Dynamic load rating
7.8kN
Co · Static load rating
0.33kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UEC 205 2S

Cross references

ManufacturerDesignation / part number
SKFPF25RM
INARAY25

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UEC 205 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter25mm
BWidth inner ring27.2mm
DaCentering diameter60mm
LDiameter of housings95mm
ADistance from the housing flange to the front of the inner ring of the bearing21.5mm
A1Housing flange thickness2mm
A2Half-housing width9mm
JPitch circle diameter76mm
NLength of attachment bolt square hole8.7mm
FrRadial load3.6kN
FaAxial load1.8kN
kgMass0.33kg
CdynDynamic load rating14kN
CoStatic load rating7.8kN
PuFatigue load limit0.335kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UEC 205 2S
Technical drawingClick to enlarge