Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type C
  6. UYC 206 2S

UYC 206 2S

Y-Bearing Flanged Units With Round Pressed Steel Housing "C"

30mm
d · Bore diameter
90.5mm
J · Pitch circle diameter
19.5kN
Cdyn · Dynamic load rating
11.2kN
Co · Static load rating
0.58kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UYC 206 2S

Cross references

ManufacturerDesignation / part number
CLAAS610449.0

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

Bearing makers' type equivalents

ManufacturerDesignation / part number
SKFPF 30 FM
INAGRA30
INARA30
SNRESPF206
NTNAELPF206W3

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UYC 206 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter30mm
B1Width inner ring with locking collar35.7mm
DaCentering diameter71mm
LDiameter of housings112mm
ADistance from the housing flange to the front of the inner ring of the bearing29.2mm
A1Housing flange thickness2.5mm
A2Half-housing width9.5mm
JPitch circle diameter90.5mm
NLength of attachment bolt square hole10.5mm
FrRadial load5kN
FaAxial load2.5kN
kgMass0.58kg
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.475kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UYC 206 2S
Technical drawingClick to enlarge