Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type C
  6. LEC 204 2F

LEC 204 2F

Y-Bearing Flanged Units With Round Pressed Steel Housing "C"

20mm
d · Bore diameter
71.5mm
J · Pitch circle diameter
12.7kN
Cdyn · Dynamic load rating
6.55kN
Co · Static load rating
0.3kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LEC 204 2F

Cross references

ManufacturerDesignation / part number
SKFPF 20 TF

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LEC 204 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter20mm
BWidth inner ring31mm
DaCentering diameter55mm
LDiameter of housings91mm
ADistance from the housing flange to the front of the inner ring of the bearing20.3mm
A1Housing flange thickness2mm
A2Half-housing width8mm
JPitch circle diameter71.5mm
NLength of attachment bolt square hole8.7mm
FrRadial load3.3kN
FaAxial load1.6kN
kgMass0.3kg
CdynDynamic load rating12.7kN
CoStatic load rating6.55kN
PuFatigue load limit0.28kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LEC 204 2F
Technical drawingClick to enlarge