Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UE
  6. UE 209 2S

UE 209 2S

Y-Ball Bearings With Grub Screw Locking

45mm
d · Bore diameter
85mm
D · Outside diameter
33.2kN
Cdyn · Dynamic load rating
21.6kN
Co · Static load rating
0.48kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UE 209 2S

Cross references

ManufacturerDesignation / part number
AMAZONECA054
SKFYAT209
INAGAY45NPPB
NTNUB209
NSKAS209
SNRUS209G2
Ростсельмаш КЗUE 209 2S

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UE 209 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter45mm
DOutside diameter85mm
BWidth inner ring37mm
CWidth outer ring22mm
sDistance from inner ring side face to raceway centre11.2mm
d1Outer diameter inner ring56.6mm
EDistance from raceway centre to the hole for lubrication6.1mm
GsSet screwM8x1mm
swHexagonal key size for set screw4mm
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension1.5mm
CdynDynamic load rating33.2kN
CoStatic load rating21.6kN
PuFatigue load limit0.915kN
kgMass0.48kg
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UE 209 2S
Technical drawingClick to enlarge