Photo

UE 206 2S

Y-Ball Bearings With Grub Screw Locking

30mm

d · Bore diameter

62mm

D · Outside diameter

19.5kN

Cdyn · Dynamic load rating

11.2kN

Co · Static load rating

0.23kg

kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Send an inquiryinfo@pobearings.sk Call us+421 51 749 50 89

Designation: UE 206 2S

Cross references

Manufacturer	Designation / part number
SKF	`YAT206`
INA	`GAY30NPPB`
NTN	`UB206`
NSK	`AS206`
MONOSEM	`4514`
GRIMME	`B96.00061`
SNR	`US206G2`
MONOSEM	`30161006`
EURO PRIMA	`UE 206 2S`
Навигатор НМ ООО	`UE 206 2S`
ОАО Калинковичский РМЗ	`UE 206 2S`

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S: One lip rubber metal seal (on both sides)

All prefixes and suffixes

Downloads

Datasheet (PDF)Official FKL datasheet CAD model (STP)3D geometry for design work

UE 206 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

Symbol	Parameter	Value
d	Bore diameter	30mm
D	Outside diameter	62mm
B	Width inner ring	33mm
C	Width outer ring	18mm
s	Distance from inner ring side face to raceway centre	9.2mm
d1	Outer diameter inner ring	39.7mm
E	Distance from raceway centre to the hole for lubrication	5.6mm
Gs	Set screw	M6x0.75mm
sw	Hexagonal key size for set screw	3mm
r1,2	Inner ring Chamfer dimension	0.6mm
r3,4	Outside ring Chamfer dimension	0.6mm
Cdyn	Dynamic load rating	19.5kN
Co	Static load rating	11.2kN
Pu	Fatigue load limit	0.475kN
kg	Mass	0.23kg

Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types