Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UE
  6. UE 207 2S.SH

UE 207 2S.SH

Y-Ball Bearings With Grub Screw Locking

Application:Universal

35mm
d · Bore diameter
72mm
D · Outside diameter
25.5kN
Cdyn · Dynamic load rating
15.3kN
Co · Static load rating
0.31kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UE 207 2S.SH

Cross references

ManufacturerDesignation / part number
SNRCUS207

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
SH
Cylindrical outer ring without lubrication holes
All prefixes and suffixes
UE 207 2S.SH

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter35mm
DOutside diameter72mm
BWidth inner ring33mm
CWidth outer ring19mm
sDistance from inner ring side face to raceway centre9.7mm
d1Outer diameter inner ring46.1mm
EDistance from raceway centre to the hole for lubrication5.6mm
GsSet screwM6x0.76mm
swHexagonal key size for set screw3mm
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension1mm
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.655kN
kgMass0.31kg
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UE 207 2S.SH
Technical drawingClick to enlarge