Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type S
  6. LYS 215 2F

LYS 215 2F

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "S"

75mm
d · Bore diameter
275mm
L · Overall length
66.3kN
Cdyn · Dynamic load rating
49kN
Co · Static load rating
8.4kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LYS 215 2F

Cross references

ManufacturerDesignation / part number
INARASE75
SNREXP215
SNREXPE215
NTNUELP215D1W3

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LYS 215 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter75mm
LOverall length275mm
AHousing contact surface width74mm
A1Width of the top of the housing54mm
HHousing height165mm
H1Distance from the contact surface to the bearing axis82.5mm
H2Housing foot thickness28mm
JminMin. distance between the holes209mm
JmaxMax. distance between the holes225mm
NDiameter of attachment slot25mm
N1Length of attachment slot33mm
s1Distance from locking device side face to raceway centre54.8mm
kgMass8.4kg
CdynDynamic load rating66.3kN
CoStatic load rating49kN
PuFatigue load limit2.04kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LYS 215 2F
Technical drawingClick to enlarge