Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type S
  6. LKS 218 2F + H2318

LKS 218 2F + H2318

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "S"

80mm
d · Bore diameter
327mm
L · Overall length
85kN
Cdyn · Dynamic load rating
65kN
Co · Static load rating
13.7kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LKS 218 2F + H2318

Cross references

ManufacturerDesignation / part number
SNRUKP218H
SNRUKPE218H
NTNUKP218D1;H2318X
FAGUKP218 + H2318X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LKS 218 2F + H2318

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter80mm
LOverall length327mm
AHousing contact surface width88mm
A1Width of the top of the housing54mm
HHousing height200mm
H1Distance from the contact surface to the bearing axis101.6mm
H2Housing foot thickness33mm
JminMin. distance between the holes254mm
JmaxMax. distance between the holes270mm
NDiameter of attachment slot27mm
N1Length of attachment slot35mm
s1Distance from locking device side face to raceway centre47mm
kgMass13.7kg
CdynDynamic load rating85kN
CoStatic load rating65kN
PuFatigue load limit1.72kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LKS 218 2F + H2318
Technical drawingClick to enlarge