Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type S
  6. LES 218 2F

LES 218 2F

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "S"

90mm
d · Bore diameter
327mm
L · Overall length
95.6kN
Cdyn · Dynamic load rating
72kN
Co · Static load rating
13.7kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LES 218 2F

Cross references

ManufacturerDesignation / part number
SKFSYJ90TF
FAGUCP218
NTNUCP218
NSKUCP218
INARASEY90
SNRUCPE218
SNRUCP218

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LES 218 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter90mm
LOverall length327mm
AHousing contact surface width88mm
A1Width of the top of the housing54mm
HHousing height200mm
H1Distance from the contact surface to the bearing axis101.6mm
H2Housing foot thickness33mm
JminMin. distance between the holes254mm
JmaxMax. distance between the holes270mm
NDiameter of attachment slot27mm
N1Length of attachment slot35mm
s1Distance from locking device side face to raceway centre54mm
kgMass13.7kg
CdynDynamic load rating95.6kN
CoStatic load rating72kN
PuFatigue load limit2.7kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LES 218 2F
Technical drawingClick to enlarge