Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LY
  6. LY 208-108 2F

LY 208-108 2F

Y-Ball Bearings With Eccentric Locking Collar

38.1mm
d · Bore diameter
80mm
D · Outside diameter
23.6kN
Cdyn · Dynamic load rating
19.8kN
Co · Static load rating
0.8kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LY 208-108 2F

Cross references

ManufacturerDesignation / part number
JOHN DEEREJD10006
JOHN DEEREAE12299E
JOHN DEEREJD9434
JOHN DEEREAE48913
CASE664597R91
CASE454113R91
SKFYEL208-108-2F
INAG1108KRRB-AS2/V
FAFNIRG1108KRRB
CASE455111R91
SNREX208-24G2
PTIHC 208X1-1/2
FAFNIR1108KRRB
MASSEY FERGUSON83212M1
MASSEY FERGUSON834066M1
MASSEY FERGUSON834836M1
MASSEY FERGUSON834866M1
MEYER MORTONRA108RRB & Col
FAFNIRRA108RRB
OWATONNA010-14047

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LY 208-108 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter38.1mm
DOutside diameter80mm
BWidth inner ring42.8mm
CWidth outer ring21mm
sDistance from inner ring side face to raceway centre21.4mm
d1Outer diameter inner ring51.8mm
EDistance from raceway centre to the hole for lubrication6.15mm
GsSet screw3/8-24 UNFinch
swHexagonal key size for set screw4.763mm
swHexagonal key size for set screw3/16inch
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension1.2mm
B1Width inner ring with locking collar56.3mm
d2Locking collar outside diameter58.1mm
B2Width locking collar18.3mm
kgMass0.8kg
CdynDynamic load rating23.6kN
CoStatic load rating19.8kN
PuFatigue load limit0.832kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LY 208-108 2F
Technical drawingClick to enlarge