Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LY
  6. LY 211 2F.H

LY 211 2F.H

Y-Ball Bearings With Eccentric Locking Collar

55mm
d · Bore diameter
100mm
D · Outside diameter
43.6kN
Cdyn · Dynamic load rating
29kN
Co · Static load rating
1.25kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LY 211 2F.H

Cross references

ManufacturerDesignation / part number
PBFA211
SIPMAZ-224
SIPMAPN-73/M-86120
SIPMA0631-214-062
INAE55KRRB
FAFNIRE55KRRB
RHP1055-55DECG
SKFYEL 211 2FW

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
H
No lubrication hole
All prefixes and suffixes

Downloads

LY 211 2F.H

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter55mm
DOutside diameter100mm
BWidth inner ring55.6mm
CWidth outer ring25mm
sDistance from inner ring side face to raceway centre27.8mm
d1Outer diameter inner ring69.1mm
GsSet screwM10x1mm
swHexagonal key size for set screw5mm
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension2mm
B1Width inner ring with locking collar71.4mm
d2Locking collar outside diameter74.5mm
B2Width locking collar20.6mm
kgMass1.25kg
CdynDynamic load rating43.6kN
CoStatic load rating29kN
PuFatigue load limit1.218kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LY 211 2F.H
Technical drawingClick to enlarge