Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LY
  6. LY 209-110 2F

LY 209-110 2F

Y-Ball Bearings With Eccentric Locking Collar

41.275mm
d · Bore diameter
85mm
D · Outside diameter
33.2kN
Cdyn · Dynamic load rating
21.6kN
Co · Static load rating
0.76kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LY 209-110 2F

Cross references

ManufacturerDesignation / part number
JOHN DEEREJD9427
JOHN DEEREJD9426
SKFYEL209-110-2F
INAG1110KRRB-AS2/V
FAFNIR1110KRRB
LONG MANUFACTURING N.C.9-90157
NEW HOLLAND131573
FAFNIRG1110KRRB
OWATONNA010-11409

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LY 209-110 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter41.275mm
DOutside diameter85mm
BWidth inner ring42.8mm
CWidth outer ring22mm
sDistance from inner ring side face to raceway centre21.4mm
d1Outer diameter inner ring56.6mm
EDistance from raceway centre to the hole for lubrication6.1mm
GsSet screw3/8-24 UNFinch
swHexagonal key size for set screw4.763mm
swHexagonal key size for set screw3/16inch
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension1.5mm
B1Width inner ring with locking collar56.3mm
d2Locking collar outside diameter63.6mm
B2Width locking collar18.3mm
kgMass0.76kg
CdynDynamic load rating33.2kN
CoStatic load rating21.6kN
PuFatigue load limit0.92kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LY 209-110 2F
Technical drawingClick to enlarge