Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type G
  6. LEG 208 2F

LEG 208 2F

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

40mm
d · Bore diameter
120mm
J · Pitch circle diameter
30.7kN
Cdyn · Dynamic load rating
19kN
Co · Static load rating
1.89kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LEG 208 2F

Cross references

ManufacturerDesignation / part number
SKFFYC40TF
NTNUCFC208
NSKUCFC208
FAGUCFC208J7
INARMEY40
SNRUCFC208
NTNM-UCFC208D1
ЧКЗ ОООLEG 208 2F
Агропромтехника ОООLEG 208 2F
ООО Сельмаш (Сызрань)LEF 208 2F

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LEG 208 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter40mm
DaCentering diameter100mm
LOverall width145mm
ADistance from the housing flange to the front of the inner ring of the bearing41.2mm
A1Total housing width36mm
A2Housing flange thickness9mm
A3Centering diameter height10mm
JPitch circle diameter120mm
J1Distance between the holes84.8mm
NDiameter of attachment slot14mm
kgMass1.89kg
CdynDynamic load rating30.7kN
CoStatic load rating19kN
PuFatigue load limit0.8kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LEG 208 2F
Technical drawingClick to enlarge