Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type V
  6. UYV 208 2S

UYV 208 2S

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "V"

40mm
d · Bore diameter
84mm
J · Pitch circle diameter
30.7kN
Cdyn · Dynamic load rating
19kN
Co · Static load rating
1.7kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UYV 208 2S

Cross references

ManufacturerDesignation / part number
SNRESPA208

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
UYV 208 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter40mm
LOverall length116mm
AHousing contact surface width54mm
A1Width of the top of the housing31.5mm
HHousing height49.2mm
H1Distance from the contact surface to the bearing axis12mm
H2Housing foot thickness100mm
JPitch circle diameter84mm
GThreadM16mm
G1Thread length20mm
s1Distance from locking device side face to raceway centre32.7mm
kgMass1.7kg
CdynDynamic load rating30.7kN
CoStatic load rating19kN
PuFatigue load limit0.8kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UYV 208 2S
Technical drawingClick to enlarge