Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type V
  6. LSV 208 2F

LSV 208 2F

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "V"

40mm
d · Bore diameter
84mm
J · Pitch circle diameter
30.7kN
Cdyn · Dynamic load rating
19kN
Co · Static load rating
1.59kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LSV 208 2F

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LSV 208 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter40mm
LOverall length116mm
AHousing contact surface width54mm
A1Width of the top of the housing31.5mm
HHousing height49.2mm
H1Distance from the contact surface to the bearing axis12mm
H2Housing foot thickness100mm
JPitch circle diameter84mm
GThreadM18mm
G1Thread length20mm
s1Distance from locking device side face to raceway centre17mm
kgMass1.59kg
CdynDynamic load rating30.7kN
CoStatic load rating19kN
PuFatigue load limit0.8kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LSV 208 2F
Technical drawingClick to enlarge