Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type T
  6. UYT 207 2S

UYT 207 2S

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"

35mm
d · Bore diameter
129mm
L · Overall length
25.5kN
Cdyn · Dynamic load rating
15.3kN
Co · Static load rating
1.62kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UYT 207 2S

Cross references

ManufacturerDesignation / part number
SKFTU35FM
INAPTUE35

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UYT 207 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter35mm
D1Hole diameter22mm
LOverall length129mm
L1Distance from the contact surface of housing to the bearing axis78mm
L2Length of attachment slot17mm
AOverall width37mm
A1Width of location slot13.5mm
A2Housing flange thickness30mm
HHousing height103mm
H1Distance between bottoms of location slot89mm
NDiameter of attachment slot38mm
N1Length of attachment slot12mm
s1Distance from locking device side face to raceway centre29.4mm
kgMass1.62kg
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.655kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UYT 207 2S
Technical drawingClick to enlarge