Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type T
  6. UET 208 2S

UET 208 2S

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"

40mm
d · Bore diameter
145mm
L · Overall length
30.7kN
Cdyn · Dynamic load rating
19kN
Co · Static load rating
2.23kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UET 208 2S

Cross references

ManufacturerDesignation / part number
SNRUST208

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
UET 208 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter40mm
D1Hole diameter29mm
LOverall length145mm
L1Distance from the contact surface of housing to the bearing axis88mm
L2Length of attachment slot19mm
AOverall width49mm
A1Width of location slot17.5mm
A2Housing flange thickness33mm
HHousing height115mm
H1Distance between bottoms of location slot101mm
NDiameter of attachment slot50mm
N1Length of attachment slot15mm
s1Distance from locking device side face to raceway centre25.3mm
kgMass2.23kg
CdynDynamic load rating30.7kN
CoStatic load rating19kN
PuFatigue load limit0.8kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UET 208 2S
Technical drawingClick to enlarge