Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type US
  6. US 209 2S.H

US 209 2S.H

Y-Ball Bearings With Standard Inner Ring

45mm
d · Bore diameter
85mm
D · Outside diameter
32.5kN
Cdyn · Dynamic load rating
20.4kN
Co · Static load rating
0.4kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: US 209 2S.H

Cross references

ManufacturerDesignation / part number
UNIAUS 209 2S.H

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
H
No lubrication hole
All prefixes and suffixes
US 209 2S.H

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter45mm
DOutside diameter85mm
BWidth inner ring19mm
d1Outer diameter inner ring56.6mm
r1,2Inner ring Chamfer dimension1.1mm
D1Hole diameter72.6mm
kgMass0.4kg
CdynDynamic load rating32.5kN
CoStatic load rating20.4kN
PuFatigue load limit0.64kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – US 209 2S.H
Technical drawingClick to enlarge