Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type US
  6. US 310 2S

US 310 2S

Y-Ball Bearings With Standard Inner Ring

50mm
d · Bore diameter
110mm
D · Outside diameter
61.8kN
Cdyn · Dynamic load rating
38kN
Co · Static load rating
0.95kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: US 310 2S

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
US 310 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter50mm
DOutside diameter110mm
BWidth inner ring27mm
d1Outer diameter inner ring68.7mm
EDistance from raceway centre to the hole for lubrication7.7mm
r1,2Inner ring Chamfer dimension2mm
D1Hole diameter92.6mm
CdynDynamic load rating61.8kN
CoStatic load rating38kN
PuFatigue load limit1.6kN
kgMass0.95kg
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – US 310 2S
Technical drawingClick to enlarge