Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Special Program for Agriculture
  4. For Harvester
  5. US 209 2S.H.T.C21

US 209 2S.H.T.C21

Y-Ball Bearings with Standard Inner Ring

Application:Harvester

45mm
d · Bore diameter
85mm
D · Outside diameter
33.2kN
Cdyn · Dynamic load rating
21.6kN
Co · Static load rating
0.415kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: US 209 2S.H.T.C21

Cross references

ManufacturerDesignation / part number
Ростсельмаш КЗUS 209 2S.H.T.C21
ГомсельмашUS 209 2S.H.T.C21
КЛЕВЕР АОUS 209 2S.H.T.C21

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
H
No lubrication hole
T
Outer ring with stopping pin
All prefixes and suffixes
US 209 2S.H.T.C21

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter45mm
DOutside diameter85mm
CWidth outer ring21mm
BWidth inner ring21mm
E1Distance from raceway center to the stopping pin6.5mm
PStopping pin diameter3mm
P1Stopping pin higth2mm
kgMass0.415kg
CdynDynamic load rating33.2kN
CoStatic load rating21.6kN
PuFatigue load limit0.91kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – US 209 2S.H.T.C21
Technical drawingClick to enlarge