Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Special Program for Agriculture
  4. For Harvester
  5. US 207 2S.T.C20

US 207 2S.T.C20

Y-Ball Bearings with Standard Inner Ring

Application:Harvester

35mm
d · Bore diameter
72mm
D · Outside diameter
25.5kN
Cdyn · Dynamic load rating
15.3kN
Co · Static load rating
0.295kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: US 207 2S.T.C20

What the designation means

2S
One lip rubber metal seal (on both sides)
T
Outer ring with stopping pin
All prefixes and suffixes
US 207 2S.T.C20

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter35mm
DOutside diameter72mm
CWidth outer ring20mm
BWidth inner ring20mm
EDistance from raceway centre to the hole for lubrication6mm
E1Distance from raceway center to the stopping pin6mm
PStopping pin diameter3mm
P1Stopping pin higth2mm
kgMass0.295kg
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.64kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – US 207 2S.T.C20
Technical drawingClick to enlarge