Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Special Program for Agriculture
  4. For Harvester
  5. US 206 2S.T.C18

US 206 2S.T.C18

Y-Ball Bearings with Standard Inner Ring

Application:Harvester

30mm
d · Bore diameter
62mm
D · Outside diameter
19.5kN
Cdyn · Dynamic load rating
11.2kN
Co · Static load rating
0.223kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: US 206 2S.T.C18

Cross references

ManufacturerDesignation / part number
KLEVERUS 206 2S.T.C18

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
T
Outer ring with stopping pin
All prefixes and suffixes
US 206 2S.T.C18

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter30mm
DOutside diameter62mm
CWidth outer ring18mm
BWidth inner ring18mm
EDistance from raceway centre to the hole for lubrication5.1mm
E1Distance from raceway center to the stopping pin5.1mm
PStopping pin diameter3mm
P1Stopping pin higth2mm
kgMass0.223kg
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.47kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – US 206 2S.T.C18
Technical drawingClick to enlarge