Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Special Program for Agriculture
  4. For Harvester
  5. UH 206/25 2T.H.T

UH 206/25 2T.H.T

Y-Ball Bearings With Integral Adapter Sleeve

Application:Harvester

25mm
d · Bore diameter
62mm
D · Outside diameter
19.5kN
Cdyn · Dynamic load rating
11.2kN
Co · Static load rating
0.36kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UH 206/25 2T.H.T

Cross references

ManufacturerDesignation / part number
РОСТСЕЛЬМАШUH 206/25 2T.H.T

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2T
Three lip seal on both sides
H
No lubrication hole
T
Outer ring with stopping pin
All prefixes and suffixes
UH 206/25 2T.H.T

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter25mm
DOutside diameter62mm
WKM nut outside diameter45mm
D2MB Washer outside diameter49mm
BWidth inner ring28mm
B1Width adapter sleeve38mm
CWidth outer ring18mm
LKM nut width7mm
E1Distance from raceway center to the stopping pin5mm
MThread adapter sleeveM30x1.5mm
PStopping pin diameter3mm
P1Stopping pin higth2mm
kgMass0.36kg
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.475kN
Sealing type

T SEAL / T SEAL (2T)

3-lip seal on the both side of the bearing, provides equal protection against contamination. Recommended for application where the possibility of contamination is the same on the both side.

Overview of all sealing types
Technical drawing – UH 206/25 2T.H.T
Technical drawingClick to enlarge