Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Special Program for Agriculture
  4. For Harvester
  5. UH 207/30 2S.H.T

UH 207/30 2S.H.T

Y-Ball Bearings With Integral Adapter Sleeve

Application:Harvester

30mm
d · Bore diameter
72mm
D · Outside diameter
25.5kN
Cdyn · Dynamic load rating
15.3kN
Co · Static load rating
0.47kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UH 207/30 2S.H.T

Cross references

ManufacturerDesignation / part number
HARP1680206
КЛЕВЕР АОUH 207/30 2S.H.T
Ростсельмаш КЗUH 207/30 2S.H.T
ГомсельмашUH 207/30 2S.H.T

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
H
No lubrication hole
T
Outer ring with stopping pin
All prefixes and suffixes
UH 207/30 2S.H.T

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter30mm
DOutside diameter72mm
WKM nut outside diameter52mm
D2MB Washer outside diameter57mm
BWidth inner ring22mm
B1Width adapter sleeve35mm
CWidth outer ring19mm
LKM nut width8mm
E1Distance from raceway center to the stopping pin5.7mm
MThread adapter sleeve35x1.5mm
PStopping pin diameter3mm
P1Stopping pin higth2mm
kgMass0.47kg
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.655kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UH 207/30 2S.H.T
Technical drawingClick to enlarge