Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Special Program for Agriculture
  4. For Harvester
  5. UH 205/20 2S.H.T

UH 205/20 2S.H.T

Y-Ball Bearings With Integral Adapter Sleeve

Application:Harvester

20mm
d · Bore diameter
52mm
D · Outside diameter
14kN
Cdyn · Dynamic load rating
7.8kN
Co · Static load rating
0.2kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UH 205/20 2S.H.T

Cross references

ManufacturerDesignation / part number
HARP1680204
Ростсельмаш КЗUH 205/20 2S.H.T
ГомсельмашUH 205/20 2S.H.T
КЛЕВЕР АОUH 205/20 2S.H.T

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
H
No lubrication hole
T
Outer ring with stopping pin
All prefixes and suffixes
UH 205/20 2S.H.T

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter20mm
DOutside diameter52mm
WKM nut outside diameter38mm
D2MB Washer outside diameter42.3mm
BWidth inner ring18mm
B1Width adapter sleeve29mm
CWidth outer ring16mm
LKM nut width7mm
E1Distance from raceway center to the stopping pin4.3mm
MThread adapter sleeveM25x1.5mm
PStopping pin diameter3mm
P1Stopping pin higth2mm
kgMass0.2kg
CdynDynamic load rating14kN
CoStatic load rating7.8kN
PuFatigue load limit0.335kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UH 205/20 2S.H.T
Technical drawingClick to enlarge