Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type S
  6. UES 204 2S

UES 204 2S

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "S"

20mm
d · Bore diameter
127mm
L · Overall length
12.7kN
Cdyn · Dynamic load rating
6.55kN
Co · Static load rating
0.55kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UES 204 2S

Cross references

ManufacturerDesignation / part number
SKFSYJ20RM
INAPASEY20

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UES 204 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter20mm
LOverall length127mm
AHousing contact surface width34mm
A1Width of the top of the housing23mm
HHousing height63.8mm
H1Distance from the contact surface to the bearing axis33.3mm
H2Housing foot thickness14mm
JminMin. distance between the holes89mm
JmaxMax. distance between the holes104.5mm
NDiameter of attachment slot13mm
N1Length of attachment slot20.7mm
s1Distance from locking device side face to raceway centre18.3mm
kgMass0.55kg
CdynDynamic load rating12.7kN
CoStatic load rating6.55kN
PuFatigue load limit0.28kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UES 204 2S
Technical drawingClick to enlarge