Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type D
  6. UED 207 2S

UED 207 2S

Y-Bearing Flanged Units With Triangular Pressed Steel Housing "D"

35mm
d · Bore diameter
100mm
J · Distance between the holes
25.5kN
Cdyn · Dynamic load rating
15.3kN
Co · Static load rating
0.65kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UED 207 2S

Cross references

ManufacturerDesignation / part number
SKFPFD 35 RM
INARATRY35
SNRUSPFT207

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
UED 207 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter35mm
ADistance from the housing flange to the front of the inner ring of the bearing25.8mm
A1Housing flange thickness2.5mm
A2Height of the housing10.5mm
DaCentering diameter81mm
LDiameter of housings122mm
L1Distance from the edge to the bearing axis45mm
JDistance between the holes100mm
NLength of attachment bolt square hole10.5mm
FrRadial load6.5kN
FaAxial load3.2kN
kgMass0.65kg
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.655kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UED 207 2S
Technical drawingClick to enlarge