Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type D
  6. UED 206 2S

UED 206 2S

Y-Bearing Flanged Units With Triangular Pressed Steel Housing "D"

30mm
d · Bore diameter
90.5mm
J · Distance between the holes
19.5kN
Cdyn · Dynamic load rating
11.2kN
Co · Static load rating
0.43kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UED 206 2S

Cross references

ManufacturerDesignation / part number
SKFPFD30RM
КЛЕВЕР АОUED 206 2S

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UED 206 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter30mm
ADistance from the housing flange to the front of the inner ring of the bearing23.5mm
A1Housing flange thickness2.5mm
A2Height of the housing9.5mm
DaCentering diameter71mm
LDiameter of housings112mm
L1Distance from the edge to the bearing axis38mm
JDistance between the holes90.5mm
NLength of attachment bolt square hole10.5mm
FrRadial load5kN
FaAxial load2.5kN
kgMass0.43kg
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.475kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UED 206 2S
Technical drawingClick to enlarge