Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type U
  6. LYU 206 2F

LYU 206 2F

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "U"

30mm
d · Bore diameter
76.2mm
J · Pitch circle diameter
19.5kN
Cdyn · Dynamic load rating
11.2kN
Co · Static load rating
1.1kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LYU 206 2F

Cross references

ManufacturerDesignation / part number
INARSHE30-N
SNREXPAE206

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LYU 206 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter30mm
LOverall length98mm
AHousing contact surface width48mm
A1Width of the top of the housing25mm
HHousing height81.4mm
H1Distance from the contact surface to the bearing axis42.9mm
JPitch circle diameter76.2mm
GThreadM13mm
G1Thread length15mm
s1Distance from locking device side face to raceway centre30.1mm
kgMass1.1kg
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.475kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LYU 206 2F
Technical drawingClick to enlarge