Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type T
  6. LYT 209 2F

LYT 209 2F

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"

45mm
d · Bore diameter
144mm
L · Overall length
33.2kN
Cdyn · Dynamic load rating
21.6kN
Co · Static load rating
2.46kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LYT 209 2F

Cross references

ManufacturerDesignation / part number
INARTUE45
SNREXT209
NTNUELT209D1W3

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LYT 209 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter45mm
D1Hole diameter29mm
LOverall length144mm
L1Distance from the contact surface of housing to the bearing axis87mm
L2Length of attachment slot19mm
AOverall width49mm
A1Width of location slot17.5mm
A2Housing flange thickness35mm
HHousing height117mm
H1Distance between bottoms of location slot101mm
NDiameter of attachment slot49mm
N1Length of attachment slot15mm
s1Distance from locking device side face to raceway centre34.9mm
kgMass2.46kg
CdynDynamic load rating33.2kN
CoStatic load rating21.6kN
PuFatigue load limit0.915kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LYT 209 2F
Technical drawingClick to enlarge