Exclusive FKL distributor for the Slovak Republic

+421 51 749 50 89 info@pobearings.sk
SKEN
  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type T
  6. LET 210 2F
Housing Type T

LET 210 2F

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"

50mm
d · Bore diameter
149mm
L · Overall length
35.1kN
Cdyn · Dynamic load rating
23.2kN
Co · Static load rating
2.43kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Send an inquiryinfo@pobearings.sk Call us+421 51 749 50 89
Designation: LET 210 2F

Cross references

ManufacturerDesignation / part number
SKFTU50TF
NTNUCT210
NSKUCT210
FAGUCT210J7
INARTUEY50
SNRUCT210

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

Datasheet (PDF)Official FKL datasheetCAD model (STP)3D geometry for design work
LET 210 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter50mm
D1Hole diameter29mm
LOverall length149mm
L1Distance from the contact surface of housing to the bearing axis90mm
L2Length of attachment slot19mm
AOverall width49mm
A1Width of location slot17.5mm
A2Housing flange thickness36mm
HHousing height117mm
H1Distance between bottoms of location slot101mm
NDiameter of attachment slot49mm
N1Length of attachment slot16mm
s1Distance from locking device side face to raceway centre32.6mm
kgMass2.43kg
CdynDynamic load rating35.1kN
CoStatic load rating23.2kN
PuFatigue load limit0.98kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LET 210 2F
Technical drawingClick to enlarge
View entire category · Housing Type T (45)
UYT 209 2S
Housing Type T

UYT 209 2S

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"

LYT 209 2F
Housing Type T

LYT 209 2F

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"

LST 209 2F
Housing Type T

LST 209 2F

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"

LKT 210 2F + H2310
Housing Type T

LKT 210 2F + H2310

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"

UET 210 2S
Housing Type T

UET 210 2S

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"

UYT 210 2S
Housing Type T

UYT 210 2S

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"

LYT 210 2F
Housing Type T

LYT 210 2F

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"

LST 210 2F
Housing Type T

LST 210 2F

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"

LKT 211 2F + H2311
Housing Type T

LKT 211 2F + H2311

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"

LET 211 2F
Housing Type T

LET 211 2F

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"