Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Special Program for Agriculture
  4. For Harvester
  5. LYGS 308 2F

LYGS 308 2F

Housing units LYGS, four-bolt flanged housing units, cast iron, centring spigot, F seals

Application:Harvester Solution

40mm
d · Bore diameter
158mm
J · Pitch circle diameter
41kN
Cdyn · Dynamic load rating
24kN
Co · Static load rating
3.721kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LYGS 308 2F

Cross references

ManufacturerDesignation / part number
INARMEY40-N
Ростсельмаш КЗLYGS 308 2F

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LYGS 308 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter40mm
DaCentering diameter115mm
LDiameter of housings194mm
ADistance from the housing flange to the front of the inner ring of the bearing41.9mm
A1Housing flange thickness18mm
A2Height of the housing27mm
JPitch circle diameter158mm
NHole diameter19mm
BWidth inner ring57.2mm
kgMass3.721kg
CdynDynamic load rating41kN
CoStatic load rating24kN
PuFatigue load limit1.008kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LYGS 308 2F
Technical drawingClick to enlarge