Photo

LY 313 2F

Y-Ball Bearings With Eccentric Locking Collar

65mm

d · Bore diameter

140mm

D · Outside diameter

92.3kN

Cdyn · Dynamic load rating

60kN

Co · Static load rating

3.67kg

kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Send an inquiryinfo@pobearings.sk Call us+421 51 749 50 89

Designation: LY 313 2F

Cross references

Manufacturer	Designation / part number
SNR	`EX313G2`
NTN	`UEL313D1W3`

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F: One lip rubber metal seal + flinger, on both sides

All prefixes and suffixes

Downloads

Datasheet (PDF)Official FKL datasheet

LY 313 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

Symbol	Parameter	Value
d	Bore diameter	65mm
D	Outside diameter	140mm
B	Width inner ring	85.7mm
C	Width outer ring	39mm
s	Distance from inner ring side face to raceway centre	32.6mm
d1	Outer diameter inner ring	88.3mm
E	Distance from raceway centre to the hole for lubrication	9.4mm
Gs	Set screw	M12x1.5mm
sw	Hexagonal key size for set screw	6mm
r1,2	Inner ring Chamfer dimension	2.1mm
r3,4	Outside ring Chamfer dimension	2.1mm
B1	Width inner ring with locking collar	65.1mm
d2	Locking collar outside diameter	97mm
B2	Width locking collar	27mm
Cdyn	Dynamic load rating	92.3kN
Co	Static load rating	60kN
Pu	Fatigue load limit	2.5kN
kg	Mass	3.67kg

Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types