Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LY
  6. LY 214 2F.SH

LY 214 2F.SH

Y-Ball Bearings With Eccentric Locking Collar

70mm
d · Bore diameter
125mm
D · Outside diameter
62.4kN
Cdyn · Dynamic load rating
44kN
Co · Static load rating
2.5kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LY 214 2F.SH

Cross references

ManufacturerDesignation / part number
INAE70-KRR

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
SH
Cylindrical outer ring without lubrication holes
All prefixes and suffixes
LY 214 2F.SH

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter70mm
DOutside diameter125mm
BWidth inner ring85.7mm
CWidth outer ring28mm
sDistance from inner ring side face to raceway centre34.1mm
d1Outer diameter inner ring87.1mm
EDistance from raceway centre to the hole for lubrication8.1mm
GsSet screwM10x2mm
swHexagonal key size for set screw5mm
r1,2Inner ring Chamfer dimension1.5mm
r3,4Outside ring Chamfer dimension2mm
B1Width inner ring with locking collar68.2mm
d2Locking collar outside diameter92.9mm
B2Width locking collar23.8mm
CdynDynamic load rating62.4kN
CoStatic load rating44kN
PuFatigue load limit1.86kN
kgMass2.5kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LY 214 2F.SH
Technical drawingClick to enlarge