Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LY
  6. LY 312-203 2F

LY 312-203 2F

Y-Ball Bearings With Eccentric Locking Collar

55.562mm
d · Bore diameter
130mm
D · Outside diameter
81kN
Cdyn · Dynamic load rating
52kN
Co · Static load rating
2.95kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LY 312-203 2F

Cross references

ManufacturerDesignation / part number
JOHN DEEREJD10017
JOHN DEEREJD8668
NTNSBX1218LLMC3/L014-EL
FAFNIRGN204KRRB3

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LY 312-203 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter55.562mm
DOutside diameter130mm
BWidth inner ring52mm
CWidth outer ring33mm
sDistance from inner ring side face to raceway centre23mm
d1Outer diameter inner ring81.7mm
EDistance from raceway centre to the hole for lubrication9mm
GsSet screw3/8-24 UNFinch
swHexagonal key size for set screw4.763mm
swHexagonal key size for set screw3/16inch
r1,2Inner ring Chamfer dimension2.1mm
r3,4Outside ring Chamfer dimension2.1mm
B1Width inner ring with locking collar68.4mm
d2Locking collar outside diameter89mm
B2Width locking collar23mm
kgMass2.95kg
CdynDynamic load rating81kN
CoStatic load rating52kN
PuFatigue load limit2.2kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LY 312-203 2F
Technical drawingClick to enlarge