Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LY
  6. LY 205-014 2F

LY 205-014 2F

Y-Ball Bearings With Eccentric Locking Collar

22.225mm
d · Bore diameter
52mm
D · Outside diameter
14kN
Cdyn · Dynamic load rating
7.8kN
Co · Static load rating
0.28kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LY 205-014 2F

Cross references

ManufacturerDesignation / part number
JOHN DEEREJD9442
JOHN DEEREJA9272

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

Bearing makers' type equivalents

ManufacturerDesignation / part number
INAG1014-KRR-B-AS2/V
SNREX205-14G2
NTNUEL205-014D1W3

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LY 205-014 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter22.225mm
DOutside diameter52mm
BWidth inner ring34.9mm
CWidth outer ring15mm
sDistance from inner ring side face to raceway centre17.5mm
d1Outer diameter inner ring33.6mm
EDistance from raceway centre to the hole for lubrication4.3mm
GsSet screw1/4-28 UNFinch
swHexagonal key size for set screw3.175mm
swHexagonal key size for set screw1/8inch
r1,2Inner ring Chamfer dimension0.6mm
r3,4Outside ring Chamfer dimension0.6mm
B1Width inner ring with locking collar44.4mm
d2Locking collar outside diameter37mm
B2Width locking collar13.6mm
kgMass0.28kg
CdynDynamic load rating14kN
CoStatic load rating7.8kN
PuFatigue load limit0.34kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LY 205-014 2F
Technical drawingClick to enlarge