Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LY
  6. LY 309-112 2F

LY 309-112 2F

Y-Ball Bearings With Eccentric Locking Collar

44.45mm
d · Bore diameter
100mm
D · Outside diameter
52.7kN
Cdyn · Dynamic load rating
31.5kN
Co · Static load rating
1.44kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LY 309-112 2F

Cross references

ManufacturerDesignation / part number
JOHN DEEREJD9405
JOHN DEEREJD9340

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

Bearing makers' type equivalents

ManufacturerDesignation / part number
SNREX309-28G2
NTNUEL309-112D1W3

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LY 309-112 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter44.45mm
DOutside diameter100mm
BWidth inner ring42.9mm
CWidth outer ring29mm
sDistance from inner ring side face to raceway centre19.8mm
d1Outer diameter inner ring62.1mm
EDistance from raceway centre to the hole for lubrication7.1mm
r1,2Inner ring Chamfer dimension1.5mm
r3,4Outside ring Chamfer dimension1.5mm
B1Width inner ring with locking collar58.7mm
d2Locking collar outside diameter70mm
B2Width locking collar20.6mm
kgMass1.44kg
CdynDynamic load rating52.7kN
CoStatic load rating31.5kN
PuFatigue load limit1.34kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LY 309-112 2F
Technical drawingClick to enlarge