Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LY
  6. LY 211-202 2F

LY 211-202 2F

Y-Ball Bearings With Eccentric Locking Collar

53.975mm
d · Bore diameter
100mm
D · Outside diameter
43.6kN
Cdyn · Dynamic load rating
29kN
Co · Static load rating
1.2kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LY 211-202 2F

Cross references

ManufacturerDesignation / part number
JOHN DEEREL2078C
JOHN DEEREJD9304
JOHN DEEREAE28286

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

Bearing makers' type equivalents

ManufacturerDesignation / part number
NTNUEL211-202D1W3

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LY 211-202 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter53.975mm
DOutside diameter100mm
BWidth inner ring55.6mm
CWidth outer ring25mm
sDistance from inner ring side face to raceway centre27.8mm
d1Outer diameter inner ring69.1mm
EDistance from raceway centre to the hole for lubrication7mm
GsSet screw3/8-24 UNFinch
swHexagonal key size for set screw4.763mm
swHexagonal key size for set screw3/16inch
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension2mm
B1Width inner ring with locking collar71.4mm
d2Locking collar outside diameter76.2mm
B2Width locking collar20.6mm
kgMass1.2kg
CdynDynamic load rating43.6kN
CoStatic load rating29kN
PuFatigue load limit1.25kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LY 211-202 2F
Technical drawingClick to enlarge