Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LY
  6. LY 206-103 2F.SH

LY 206-103 2F.SH

Y-Ball Bearings With Eccentric Locking Collar

30.163mm
d · Bore diameter
62mm
D · Outside diameter
19.5kN
Cdyn · Dynamic load rating
11.2kN
Co · Static load rating
0.37kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LY 206-103 2F.SH

Cross references

ManufacturerDesignation / part number
JOHN DEEREAP20211

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
SH
Cylindrical outer ring without lubrication holes
All prefixes and suffixes
LY 206-103 2F.SH

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter30.163mm
DOutside diameter62mm
BWidth inner ring36.5mm
CWidth outer ring18mm
sDistance from inner ring side face to raceway centre18.3mm
d1Outer diameter inner ring39.7mm
GsSet screw5/16-24 UNFinch
swHexagonal key size for set screw3.969mm
swHexagonal key size for set screw5/32inch
r1,2Inner ring Chamfer dimension0.6mm
r3,4Outside ring Chamfer dimension0.6mm
B1Width inner ring with locking collar48.4mm
d2Locking collar outside diameter44.2mm
B2Width locking collar16mm
kgMass0.37kg
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.48kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LY 206-103 2F.SH
Technical drawingClick to enlarge