Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type N
  6. LEN 205-100 2F

LEN 205-100 2F

Y-Bearing Flanged Units With Oval Grey Cast Iron Housing "N"

25.4mm
d · Bore diameter
99mm
J · Distance between the holes
14kN
Cdyn · Dynamic load rating
7.8kN
Co · Static load rating
0.61kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LEN 205-100 2F

Cross references

ManufacturerDesignation / part number
NTNUCFL205-100D1
FAGUCFL205-16

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LEN 205-100 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter25.4mm
dBore diameter1''inch
LOverall width68mm
ADistance from the housing flange to the front of the inner ring of the bearing35.8mm
A1Total housing width27mm
A2Housing flange thickness14mm
HHousing height130mm
JDistance between the holes99mm
NDiameter of attachment slot16mm
BWidth inner ring34.1mm
s1Distance from locking device side face to raceway centre19.8mm
kgMass0.61kg
CdynDynamic load rating14kN
CoStatic load rating7.8kN
PuFatigue load limit0.328kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LEN 205-100 2F
Technical drawingClick to enlarge